More Throughput - More Flexibility
Trident High-Yield models (DUO, TRIO, QUAD) are equipped with multiple asynchronous process chambers provide high throughput and process flexibility while maintaining a low operational cost and small footprint. All Trident high-yield models are available in low and zero discharge configurations.
Trident High-Yield models (DUO, TRIO, QUAD) are equipped with multiple asynchronous process chambers provide high throughput and process flexibility while maintaining a low operational cost and small footprint. All Trident high-yield models are available in low and zero discharge configurations.
Trident ZDO Zero Discharge Automatic Defluxing / Cleaning System is available in four throughput configurations.
Trident ZDO Series
Zero Discharge Fully Automatic Cleaning Systems
Features:
Equipped with an asymmetrical fan-jet spray system in each process chamber, Trident ZDO's twin stainless steel counter rotating spray bars feature twenty stainless steel fan-jet nozzles project precision-diffused wash solution and rinse water onto a shadow-mitigating oscillating board rack. This spray system was implemented to deliver controlled fluid energy underneath fine-pitch components. The Each Trident ZDO process chamber is pre-plumbed to accept an upper board rack assembly for even higher throughput.
Trident ZDO High-Yield Cleaning System includes a closed loop (zero discharge) wash solution section and an zero-discharge rinse section.
Features:
Dimensions:
- Trident ZDO - One process chamber
- Trident ZDO DUO - Two process chambers (shown above)
- Trident ZDO TRIO - Three process chambers
- Trident ZDO QUAD - Four process chambers
Trident ZDO Series
Zero Discharge Fully Automatic Cleaning Systems
Features:
- Removes Any Flux From Any Alloy
- Closed-Loop (Zero Discharge) Wash Cycle
- Zero Discharge Rinse Cycle
- Available in multiple throughput configurations
- Automatic Wash, Rinse, and Dry Cycles
- Built-In Programmable Cleanliness Verification Testing
- Built-In Rinse Closed-Loop Rinse Water Recycling System
- Unlimited Program Recipes (for each process chamber)
- Graphic User Touchscreen Interface (one for each process chamber)
- Automatic Chemical Dosing and Mixing System (one for each process chamber)
- Optional Real-Time Chemical Concentration Monitoring
- Advanced Statistical Process Control (SPC) Data-Logging with Barcode Scanner (one for each process chamber)
- High-Power Forced Hot-Air Convection + Radiant Drying System (for each process chamber)
- Built-In Programmable Maintenance Reminders (for each process chamber)
- Upper Board Rack Ready (each process chamber)
- Three-Position LED Status Light Tower (for each process chamber)
Equipped with an asymmetrical fan-jet spray system in each process chamber, Trident ZDO's twin stainless steel counter rotating spray bars feature twenty stainless steel fan-jet nozzles project precision-diffused wash solution and rinse water onto a shadow-mitigating oscillating board rack. This spray system was implemented to deliver controlled fluid energy underneath fine-pitch components. The Each Trident ZDO process chamber is pre-plumbed to accept an upper board rack assembly for even higher throughput.
Trident ZDO High-Yield Cleaning System includes a closed loop (zero discharge) wash solution section and an zero-discharge rinse section.
Features:
Dimensions:
- DUO: 98.5"W x 44.75”D x 70”H
- TRIO: 140.25”W x 44.75”D x 70”H
- QUAD: 182.25”W x 44.75”D x 70”H
- Electrical Requirements: 208-240 3Ø 40 amps (per chamber)
- Chemical Dosing and Mixing: Automatic 5% - 20% Concentrations (per chamber)
- Control System: Windows 7 PC User Interface Touchscreen (for each chamber)
- Advanced SPC Data Collection (for each chamber)
- Assembly Barcode Scanner (for each chamber)
- Built-In Cleanliness Verification Technology (for each chamber)
- Construction: Welded Steel Tube Frame with Steel Panels
- Finish: Baked Powder-Coat Hammer-Tone Finish
- Plumbing Materials: Stainless Steel
- Fluid Delivery Technology: 20 Asymmetrically Placed 15° Stainless Steel Nozzles
- Number of Process Chambers: 1-4
Trident CLO Closed-Loop Automatic Defluxing / Cleaning System is available in four throughput configurations.
Trident CLO High-Yield Series
Closed-Loop Fully Automatic Cleaning Systems
Features:
Each Trident CLO process chamber is equipped with an asymmetrical fan-jet spray system. Twin stainless steel counter rotating spray bars featuring twenty stainless steel fan-jet nozzles project precision-diffused deionized water onto a shadow-mitigating oscillating board rack. This spray system was implemented to deliver controlled fluid energy underneath fine-pitch components. The Each Trident CLO process chamber is pre-plumbed to accept an upper board rack assembly for even higher throughput.
Features:
Dimensions:
- Trident CLO - One process chamber
- Trident CLO DUO - Two process chambers (shown above)
- Trident CLO TRIO - Three process chambers
- Trident CLO QUAD - Four process chambers
Trident CLO High-Yield Series
Closed-Loop Fully Automatic Cleaning Systems
Features:
- Removes Water Soluble Fluxes
- Closed-Loop (Zero Discharge) Cleaning Cycle
- Available in multiple throughput configurations
- Automatic Cleaning and Dying Cycles
- Built-In Programmable Cleanliness Verification Testing
- Built-In Rinse Closed-Loop Water Recycling System
- Unlimited Program Recipes (for each process chamber)
- Graphic User Touchscreen Interface (one for each process chamber)
- Advanced Statistical Process Control (SPC) Data-Logging with Barcode Scanner (one for each process chamber)
- High-Power Forced Hot-Air Convection + Radiant Drying System (for each process chamber)
- Built-In Programmable Maintenance Reminders (for each process chamber)
- Upper Board Rack Ready (each process chamber)
- LED Status Light Tower (for each process chamber)
Each Trident CLO process chamber is equipped with an asymmetrical fan-jet spray system. Twin stainless steel counter rotating spray bars featuring twenty stainless steel fan-jet nozzles project precision-diffused deionized water onto a shadow-mitigating oscillating board rack. This spray system was implemented to deliver controlled fluid energy underneath fine-pitch components. The Each Trident CLO process chamber is pre-plumbed to accept an upper board rack assembly for even higher throughput.
Features:
Dimensions:
- DUO: 86”W x 48”D x 71”H
- TRIO: 129”W x 48”D x 71”H
- QUAD: 171”W x 48”D x 71”H
- Electrical Requirements: 208-240 3Ø 40 amps (per chamber)
- Control System: Windows 7 PC User Interface Touchscreen
- Advanced SPC Data Collection
- Assembly Barcode Scanning Capability (barcode scanner included)
- Built-In Cleanliness Verification Technology: Standard
- Construction: Welded Steel Tube Frame with Steel Panels
- Finish: Baked Powder-Coat Hammer-Tone Finish
- Plumbing Materials: Stainless Steel
- Fluid Delivery Technology: 20 Asymmetrically Placed 15° Stainless Steel Nozzles
- Number of Process Chambers: 1 Standard (2-4 Optional)
Trident LDO Low Discharge Automatic Defluxing / Cleaning System is available in four throughput configurations.
Trident High-Yield LDO Series
Low Discharge Fully Automatic Cleaning Systems
Features:
Equipped with an asymmetrical fan-jet spray system in each process chamber, Trident LDO's twin stainless steel counter rotating spray bars feature twenty stainless steel fan-jet nozzles project precision-diffused wash solution and rinse water onto a shadow-mitigating oscillating board rack. This spray system was implemented to deliver controlled fluid energy underneath fine-pitch components. The Each Trident LDO process chamber is pre-plumbed to accept an upper board rack assembly for even higher throughput.
Trident LDO High-Yield Cleaning System includes a closed loop (zero discharge) wash solution section and a low-discharge filtered rinse section.
Features:
Dimensions:
- Trident LDO - One process chamber
- Trident LDO DUO - Two process chambers (shown above)
- Trident LDO TRIO - Three process chambers
- Trident LDO QUAD - Four process chambers
Trident High-Yield LDO Series
Low Discharge Fully Automatic Cleaning Systems
Features:
- Removes Any Flux From Any Alloy
- Closed-Loop (Zero Discharge) Wash Cycle
- Filtered Discharge Rinse Cycle
- Available in multiple throughput configurations
- Automatic Wash, Rinse, and Dry Cycles
- Built-In Programmable Cleanliness Verification Testing
- Built-In Rinse Water Filtration System
- Unlimited Program Recipes (for each process chamber)
- Graphic User Touchscreen Interface (one for each process chamber)
- Automatic Chemical Dosing and Mixing System (one for each process chamber)
- Optional Real-Time Chemical Concentration Monitoring
- Advanced Statistical Process Control (SPC) Data-Logging with Barcode Scanner (one for each process chamber)
- High-Power Forced Hot-Air Convection + Radiant Drying System (for each process chamber)
- Built-In Programmable Maintenance Reminders (for each process chamber)
- Upper Board Rack Ready (each process chamber)
- Three-Position LED Status Light Tower (for each process chamber)
Equipped with an asymmetrical fan-jet spray system in each process chamber, Trident LDO's twin stainless steel counter rotating spray bars feature twenty stainless steel fan-jet nozzles project precision-diffused wash solution and rinse water onto a shadow-mitigating oscillating board rack. This spray system was implemented to deliver controlled fluid energy underneath fine-pitch components. The Each Trident LDO process chamber is pre-plumbed to accept an upper board rack assembly for even higher throughput.
Trident LDO High-Yield Cleaning System includes a closed loop (zero discharge) wash solution section and a low-discharge filtered rinse section.
Features:
Dimensions:
- DUO: 86”W x 48”D x 71”H
- TRIO: 129”W x 48”D x 71”H
- QUAD: 171”W x 48”D x 71”H
- Electrical Requirements: 208-240 3Ø 40 amps (per chamber)
- Chemical Dosing and Mixing: Automatic 5% - 20% Concentrations (per chamber)
- Control System: Windows 7 PC User Interface Touchscreen (for each chamber)
- Advanced SPC Data Collection (for each chamber)
- Assembly Barcode Scanner (for each chamber)
- Built-In Cleanliness Verification Technology (for each chamber)
- Construction: Welded Steel Tube Frame with Steel Panels
- Finish: Baked Powder-Coat Hammer-Tone Finish
- Plumbing Materials: Stainless Steel
- Fluid Delivery Technology: 20 Asymmetrically Placed 15° Stainless Steel Nozzles
- Number of Process Chambers: 1-4t.
Trident ECO Low Discharge Automatic Defluxing / Cleaning System is available in four throughput configurations.
Trident High-Yield ECO Series
Low Discharge Fully Automatic Cleaning Systems
Features:
Equipped with an asymmetrical fan-jet spray system in each process chamber, Trident ECO's twin stainless steel counter rotating spray bars feature twenty stainless steel fan-jet nozzles project precision-diffused wash solution and rinse water onto a shadow-mitigating oscillating board rack. This spray system was implemented to deliver controlled fluid energy underneath fine-pitch components.
Features:
Dimensions:
- Trident ECO - One process chamber
- Trident ECO DUO - Two process chambers (shown above)
- Trident ECO TRIO - Three process chambers
- Trident ECO QUAD - Four process chambers
Trident High-Yield ECO Series
Low Discharge Fully Automatic Cleaning Systems
Features:
- Removes Any Flux From Any Alloy
- Closed-Loop (Zero Discharge) Wash Cycle
- Filtered Discharge Rinse Cycle
- Available in multiple throughput configurations
- Automatic Wash, Rinse, and Dry Cycles
- Unlimited Program Recipes (for each process chamber)
- Graphic User Touchscreen Interface (one for each process chamber)
- Optional Real-Time Chemical Concentration Monitoring
- Drying System (for each process chamber)
Equipped with an asymmetrical fan-jet spray system in each process chamber, Trident ECO's twin stainless steel counter rotating spray bars feature twenty stainless steel fan-jet nozzles project precision-diffused wash solution and rinse water onto a shadow-mitigating oscillating board rack. This spray system was implemented to deliver controlled fluid energy underneath fine-pitch components.
Features:
Dimensions:
- DUO: 86”W x 48”D x 71”H
- TRIO: 129”W x 48”D x 71”H
- QUAD: 171”W x 48”D x 71”H
- Electrical Requirements: 208-240 3Ø 40 amps (per chamber)
- Control System: Windows 7 PC User Interface Touchscreen (for each chamber)
- Construction: Welded Steel Tube Frame with Steel Panels
- Finish: Baked Powder-Coat Hammer-Tone Finish
- Plumbing Materials: Stainless Steel
- Fluid Delivery Technology: 20 Asymmetrically Placed 15° Stainless Steel Nozzles
- Number of Process Chambers: 1-4
